Skip to content
Bellingham Roof Pros

About Bellingham Roof Pros: Licensed Roofing Pros in WA

Bellingham Roof Pros works Bellingham, Ferndale, Lynden, Blaine, Birch Bay and the northern Skagit valley, doing residential reroofing, leak diagnosis, storm repair, ventilation corrections, flashing and commercial low-slope work. Everything we do is organized around one local fact: at this latitude the direction a roof plane faces determines its life more than the shingle on it does.

That belief came out of tear-offs rather than a book. Open up enough Whatcom County roofs and you stop being surprised by soft sheathing on one eave and dry plywood twenty feet away on the other, and you start writing estimates that admit it. Our proposals carry a bearing, a pitch and a separate deck allowance for every plane on the house.

Look elsewhere if what you want is a coating on a north-facing roof, a skylight on a north plane, or a hail claim on a Whatcom County house that has never seen hail. We turn all three down regularly and we will explain why at no charge, but if that is what you came for, another company will happily take the work and you should call them instead.

If you have a roofing project in Bellingham, the fastest way to get a real number is a free on-site estimate. See every Bellingham service we handle, check whether we cover Ferndale, WA and the rest of the Nooksack lowland and north Skagit County, or go back to the Bellingham Roof Pros homepage to start. You can also reach us directly on (844) 511-2320.

Credentials

  • License: Registered Washington general contractor with the Department of Labor and Industries, carrying the $30,000 contractor bond required by RCW 18.27.040 and liability coverage above the RCW 18.27.050 minimums
  • Insurance: Liability and property damage coverage above the state minimum, plus workers compensation through L and I
  • Association: Member of the Building Industry Association of Whatcom County
  • Warranty: a written workmanship warranty

How Bellingham Roof Pros works

How a job with Bellingham Roof Pros runs, start to finish

Site visit first, always. We measure, look at the real condition of the work area, and ask what you are actually trying to solve — then you get an itemized free estimate in writing with materials, scope and a realistic date on it.

Once the work starts, the same crew stays on the job until it is done. We protect the surrounding area, clean up daily, and tell you the moment something under the surface changes the plan, because the alternative is a surprise invoice and nobody wants that conversation. a written workmanship warranty backs the finished work.

What we will not do

We do not quote a roofing job over the phone, take deposits before a written scope exists, or bid work we are not set up to do properly. If your project needs a different trade, we say so and point you at someone who does it well. Losing a job is cheaper than doing one badly in Bellingham.

Where Bellingham Roof Pros works and who we work with

Bellingham, WA first, then the surrounding communities of the Nooksack lowland and north Skagit County: Ferndale, Lynden, Mount Vernon, Anacortes, Sedro-Woolley, Birch Bay, Burlington, Sudden Valley and more. Each of those has its own page with local detail rather than a copy of this one.

Work splits roughly between homeowners and commercial property — offices, retail, restaurants, apartment complexes and HOA boards across the Nooksack lowland and north Skagit County. Start with the Bellingham services, the Bellingham Roof Pros homepage, or just call (844) 511-2320.

Why Bellingham Chooses Bellingham Roof Pros

  • We shoot a compass bearing on every plane of your roof and write it on the diagram, because at 48.75 degrees north the bearing answers more questions than the shingle brand does.
  • We will not put a skylight on a north-facing plane in this city, and we will show you the winter sun angle rather than argue about it.
  • We do not sell coatings for north-facing roofs here. A film that needs warmth to cure and sunlight to stay dry has nothing to work with on that side of a Bellingham building.
  • Steel over a shaded plane goes down on furring with a drained airspace beneath it, never flat to the deck, because a cold panel condenses on its underside long before it ever leaks.
  • Intake and exhaust get counted eave by eave rather than averaged over the house, since a ridge shared between a sunlit plane and a dark one draws its makeup air down the wrong side.
  • Our proposals state the calendar window in which each plane actually receives direct sun, so you can see for yourself why we scheduled your north side for April.

What Bellingham Customers Say

★★★★★
Two other outfits wanted to tear off the whole thing. These guys measured both sides, showed me the sun numbers, and said the south half had six or seven years left. We did the north plane and the ventilation and spent about half what we were expecting.
Marta H. · Ferndale
★★★★★
Lost about thirty shingles in an outflow blow. They were out the next morning, and the estimate came with a diagram showing which plane each missing shingle came off. Every one was on the northeast side. Hand-sealed the whole aspect when they redid it.
Dennis K. · Lynden
★★★★★
I called about a skylight for a north-facing room and was told plainly not to do it, with the reason. They put in a tube instead for a fraction of the price. I have never had a contractor argue me down before.
Priya S. · Mount Vernon
★★★★★
Wanted a coating on the low-slope section over the garage. They walked it, said it would peel by the second winter on that exposure, and quoted a membrane instead. Two years on and it is dry, which is more than I can say for the last coating I paid for.
Ray L. · Blaine
Call Now